Home › Forums › Marketplace › FS: Wills Wing Sport 3 170 $SOLD Local Pick-up
- This topic has 9 replies, 5 voices, and was last updated 6 months, 3 weeks ago by Jeremy Spiegel.
-
AuthorPosts
-
March 12, 2024 at 7:04 PM #19784Jonathan DietchGeneral Member
$SOLD picked up at AJX.
Custom UVPX top & Dacron bottom (photos https://imageevent.com/aero92/fss3170).
Excellent condition. Flown by a 162# pilot. Never aero towed. Sail is very clean. 224hrs.
Includes factory raked tips. Great handling at my 195# hook-in with very low stall speed. Will accommodate to 310# hook-in.
Factory specs: https://www.willswing.com/hang-gliders/sport-3/Most recent flight: https://youtu.be/ZkWKTlclRwQ
March 13, 2024 at 9:26 AM #19787Albert SharpGeneral MemberSomeone should jump on this.
This glider has obviously already been well trained and will know its way around the sky with very little pilot input.
March 13, 2024 at 9:54 PM #19797Jonathan DietchGeneral MemberHere’s a walk-around and inspection.
March 18, 2024 at 8:11 AM #19803I’ll take it!
March 18, 2024 at 8:13 AM #19804People I trust tell me it has been immaculately cared for…
March 18, 2024 at 8:47 AM #19805I’m in the SF Bay Area. Looking at transport options…but I’ll take it.
March 18, 2024 at 9:53 AM #19806@ Jim
It’s only about a 6-hour drive , from the Bay area, to CSS ; this would make a perfect reason for you to come visit our wonderful club , and the soaring is probably better here, than where your at , (this time of season) !!!
Bille
March 18, 2024 at 9:51 PM #19814Had a warm and wonderful trip down there last August. Looking forward to another wonderful trip, hopefully less warm… ;-)
March 19, 2024 at 8:33 AM #19816Jonathan DietchGeneral MemberHad a warm and wonderful trip down there last August. Looking forward to another wonderful trip, hopefully less warm… ;-)
Well, come on down Jim!
March 20, 2024 at 8:40 AM #19833I’m in Santa Barbara this week, planning to drive back up north Monday. If the glider was able to make it here I’m happy to bring it up the rest of the way.
-
AuthorPosts
- You must be logged in to reply to this topic.